Outdoor garden jacuzzi is an important equipment for many people to relax and enjoy leisure time. However, after using the garden jacuzzi tub for a period of time, it often encounters a troubling problem - the generation of foam. Foam forms on the surface of the garden jacuzzi tub, which not only affects the user experience, but may also become a health hazard. Many bathtub users and maintainers often hear suggestions about "shock treatment" when looking for solutions.
So, can shock treatment help eliminate the foam of outdoor garden jacuzzi? Before answering this question, we need to understand the causes of foam and the mechanism of shock treatment.
What are the causes of foam in outdoor garden jacuzzi?
Chemical residues
One of the main reasons for the formation of foam is chemical residues in the water of the garden jacuzzi tub. These chemical residues may come from body washing products, cosmetics, hair care products, or even detergent residues brought in from swimsuits and towels. When these substances enter the outdoor garden jacuzzi, they will form a thin film in the water, preventing the water molecules from combining tightly, thus generating foam. More foam means more of these chemicals in the water.
Grease and Dirt
In addition to chemical residues, natural oils secreted by human skin, sweat, and dirt brought in by tub users can also cause foam to form. The water temperature of the garden jacuzzi tub is high, and oils will quickly break down and mix in the water at high temperatures. When oils come into contact with air, foam will form.
Water Quality Problems
Improper water quality is also an important cause of foam. Excessive minerals, such as calcium and magnesium, will affect the softness and hardness of the water, resulting in an imbalance in water quality. Imbalanced water quality will not only stimulate the formation of foam, but also affect the overall maintenance of the garden jacuzzi tub and may even cause damage to the equipment. Chemical imbalances in the water, especially excessive alkalinity, often accelerate the formation of foam.
Dissolved gases in water
The garden jacuzzi tub often contains a large amount of dissolved gases, such as oxygen and carbon dioxide. When the water in the garden jacuzzi tub is disturbed (such as the use of massage jets or air injection systems), these gases are released, causing foam to accumulate on the water surface. If there are too many dissolved gases in the water, foam will form more easily and be difficult to eliminate.
Incomplete cleaning
If the cleaning of the garden jacuzzi tub is not thorough, the residual dirt, grease or chemicals will accumulate in the pipes, filters or bathtub surfaces. As the bathtub is used again, these residues will be released and form foam after contact with water.
What is the principle of shock treatment for outdoor garden jacuzzi?
Before discussing whether shock treatment can effectively eliminate garden jacuzzi foam, let's first understand what "shock treatment" is. Shock treatment, also known as shock chlorination or "superchlorination", is a method of rapidly increasing the concentration of oxidants or chemical treatment agents in water to remove organic matter, bacteria, algae and other impurities.
Shock treatment usually uses chlorine or bromine as the main oxidant, which can quickly decompose pollutants in the water and oxidize organic matter into more harmless components, thereby achieving the purpose of purifying the water quality of outdoor garden jacuzzi. In addition to chlorine and bromine, non-chlorine shock treatments (such as hydrogen peroxide or persulfate) are also becoming more and more popular. These non-chlorine treatments have similar oxidizing functions, but are less irritating to human skin, eyes, and tub equipment.
The purpose of shock treatment is to restore the water to a clean state in a short period of time, so that the excess organic matter and impurities in the garden jacuzzi water are oxidized and decomposed. However, can shock treatment directly eliminate foam? To answer this question, we need to further analyze the relationship between shock treatment and foam.
What effect does shock treatment have on foam?
Eliminate organic matter
The main components of garden jacuzzi tub foam are organic matter in the water, such as body oils, cosmetic residues, and other impurities. Shock treatment can quickly decompose these organic substances by increasing the concentration of oxidants in the water, making them lose the ability to form foam. Oxidants break down organic matter into smaller molecules, which are less likely to form bubbles on the water surface, so they can effectively reduce the generation of outdoor garden jacuzzi foam.
Improve water quality balance
Shock treatment can not only remove outdoor garden jacuzzi organic matter, but also help regulate water quality balance, especially by controlling the water's acidity (pH) and oxidation-reduction potential (ORP). When the water balance is improved, impurities in the water are more easily captured by the filter, reducing the possibility of them gathering in the water and forming foam.
Water balance also includes the adjustment of hardness. If the water is too hard (too many minerals), shock treatment can help soften the outdoor garden jacuzzi water quality and reduce the risk of mineral deposits, thereby reducing the formation of foam.
Remove dissolved gases from the water
In the garden jacuzzi tub, dissolved gases in the water are released during the massage and spraying process, forming foam. Shock treatment can reduce the concentration of dissolved gases in the water by changing the redox state of the water, inhibiting the formation and accumulation of bubbles, thereby reducing the formation of foam. Although shock treatment cannot completely eliminate dissolved gases, it can reduce the persistence of foam by cleaning the water quality and reducing organic matter.
Clean pipes and equipment
Shock treatment helps clean the pipes, filters and other equipment of the garden jacuzzi tub. During the shock treatment process, oxidants will remove organic and mineral deposits attached to the surface of pipes and equipment, preventing these residues from contacting water and causing foam to form again. By keeping pipes and equipment clean, the frequency and intensity of foam will be significantly reduced.
Eliminate bacteria and algae
Bacteria and algae are another potential cause of foam formation in outdoor garden jacuzzi. Microorganisms in water can multiply rapidly with the help of organic matter, leading to the production of foam and slime. Shock treatment can quickly inhibit the growth of bacteria and algae by oxidizing them, reducing their impact on foam formation. Therefore, shock treatment helps to inhibit the formation of foam by eliminating the breeding environment for bacteria and algae.
How often should shock treatment be performed?
Although shock treatment can effectively reduce foam, it does not mean that it should be performed frequently. Excessive shock treatment may have a negative impact on the equipment and water quality of the garden jacuzzi tub. Generally speaking, shock treatment once every 1 to 2 weeks is a reasonable frequency. If the frequency of use is high or the foam problem is serious, the treatment frequency can be appropriately increased.
Importance of water quality testing
Before performing shock treatment on outdoor garden jacuzzi, it is important to test the pH, alkalinity and redox potential of the water. These parameters will affect the effectiveness of shock treatment. The pH value should be maintained between 7.2 and 7.6. If the pH value of the outdoor garden jacuzzi water is too high or too low, the effect of the shock treatment may be compromised and may even cause the foam problem to worsen.
Use shock treatment correctly
Depending on the size of the garden jacuzzi tub and the amount of water, it is very important to choose the appropriate dosage of shock treatment. Too much treatment may have a negative impact on water quality and even irritate the skin. Usually, there will be clear dosage recommendations on the product label, and the instructions should be followed strictly.
Adequate circulation and filtration
After shock treatment, the water in the garden jacuzzi tub needs to be fully circulated and filtered to ensure that oxidized organic matter is completely removed. If the filter is not cleaned in time, the oxidized organic matter may enter the water again, causing the foam problem to recur. Therefore, the filter should be cleaned regularly after treatment and the water pump should be operating properly.
What are the alternatives to shock treatment?
Although shock treatment is one of the effective ways to eliminate foam in outdoor garden jacuzzi, it is not the only solution. If frequent use of chemicals is undesirable, the following methods can be used as alternatives:
● Reduce external contamination: Encourage users to shower before entering the garden jacuzzi tub to avoid body oils and chemicals entering the water.
● Use foam inhibitors: Specialized foam inhibitors can quickly eliminate surface foam, but they are only a temporary solution.
● Regular water changes: Regularly changing the water in the garden jacuzzi tub can effectively prevent foam from forming.
Looking for affordable, high-quality spas? Guangzhou HuanTong Industrial, with over 30 years of experience, is your trusted supplier for premium outdoor spas, including outdoor garden jacuzzi tubs, swim spas. Our products are CE, ETL, and ISO9001 certified, ensuring top-notch safety and quality. With a factory capacity of over 1200 units per month, we offer wholesale pricing and bulk purchase discounts. Contact us today for low prices and exclusive offers.
